Loading...
Skip to content
Health Canada warning: Vaping products contain nicotine, a highly addictive chemical.

VEEV - FAQs

IQOS is not risk-free and delivers nicotine, which is addictive. If you are concerned about the health effects of smoking, your best option is to quit tobacco and nicotine use altogether.
Nicotine is addictive. However, it is not the main cause of smoking related diseases. IQOS delivers nicotine in a comparable way to cigarettes. Our parent company’s clinical studies show that the amount and rate of nicotine absorbed when using one tobacco stick with IQOS is comparable to that of smoking one cigarette.
The percentage refers to the average reduction of the levels of certain constituents prioritized for action by renowned public health organizations such as the WHO and the US FDA found in IQOS tobacco vapor compared to the smoke from a 3R4F reference cigarette. To this effect, we collect the tobacco vapor and smoke under the Health Canada Intense machine-smoking regime (55 mL puff volume, 2 second puff duration, 30 second interval puff) using a comparison on a per stick basis. Reduction calculations exclude nicotine
We use PMI Financials or estimates, IQOS user panels and PMI Market Research. The number of total users we report refers to IQOS users for whom PMI HEETS sticks represent at least 5% of their daily tobacco consumption over the past 7 days, while the number of people we estimate have completely quit cigarette smoking refers to IQOS users who have completely quit cigarettes and for whom PMI HEETS sticks represent at least 70% of their past 7-day heated tobacco consumption.
It is a cigarette independently designed by the University of Kentucky in the United States for scientific research purposes. It is a comparator commonly used in tobacco research, which allows the data of a given study to be compared to that of another study. 3R4F research cigarettes are not commercially available to consumers.
IQOS is an alternative for adult smokers who would otherwise continue to smoke and want to enjoy real tobacco taste.. It is not for people who have quit smoking or have never smoked. IQOS is our most advanced smoke-free product that uses sophisticated electronics to heat tobacco instead of burning it to release a flavourful nicotine containing vapour. IQOS and HEETS tobacco sticks are not for minors. Please refer to Important Information section for details.
No. IQOS is not a smoking cessation device or intended as a device to quit smoking. If you are concerned about the health effects of smoking, your best option is to quit tobacco use altogether.
No, IQOS does not produce smoke because it does not burn tobacco. It generates a tobacco vapour that is what you see when using IQOS.
IQOS is a better alternative to smoking because it heats tobacco instead of burning it. It provides real tobacco taste without fire, ash or smoke. However, IQOS is not risk-free and is addictive. If you are concerned about the health effects of smoking, your best option is to quit tobacco and nicotine use altogether.
No you should not. IQOS device has been designed to work exclusively with HEETS, and vice versa. It is only by using both together that you can take full advantage of the system that provides a true tobacco taste experience. All our studies are based on the use of IQOS with HEETS.
For any assistance, please, contact our Customer Care:
By phone: 1-800-304-4033 (9:00 AM - 1:00 AM EST)
By email: info@Iqos.ca
By Twitter: @iqos_support_ca

You must read this document carefully along with the IQOS user guide before using your IQOS device (“Device”) for the first time. This firmware licence agreement (“Agreement”) is between you ("you") and Philip Morris Products S.A.(“PMI”) and governs your use of the firmware (the software and instructions recorded in the memory) that operates with the Device ("Firmware"). No other person shall have any rights to enforce any of these terms.

If you download and install the Firmware or connect or otherwise use the Device, you are indicating that you have read and understood, and agree to be bound by, the terms of this Agreement. If you do not agree to the terms of this Agreement, you should not download the Firmware, you are not granted any rights whatsoever in the Firmware and you should not use the Device.

THESE TERMS

Licence. Subject to the terms of this Agreement PMI grants you a non-exclusive, non-transferable right to run the Firmware provided within the Device and any updated versions downloaded by you only on and as incorporated in the Device. Such a right is for domestic and private use only.

Restrictions. You must not:

  1. copy or distribute, sublicense, sell, lease, rent or otherwise exploit (either commercially or without charge) or transfer the Firmware (either alone or as incorporated into the Device) to any third party without PMI’s prior written consent;
  2. modify, adapt, alter, translate, or create derivative works from the Firmware (unless permitted to do so by law);
  3. decompile, disassemble, reverse engineer or otherwise derive source code, or attempt to derive source code, from the Firmware (unless permitted to do so by law); or
  4. allow a third party to do any of the above on your behalf.

Who owns the Firmware? The Firmware and all intellectual property rights associated with it are the exclusive property of PMI (or its licensors), except for OSS Components (which are licensed on the basis set out below). All rights in and to the Firmware not expressly granted to you in this Agreement are reserved by PMI.

Updates to the Firmware. PMI reserves the right to update the Firmware from time to time in its sole discretion, including adding, changing or removing functionalities and features. PMI is under no obligation to provide any updates to the Firmware.

Open Source Software. You understand that the Firmware may contain open source libraries, components, utilities and software (“OSS Components”). Further details of the relevant OSS Components contained in the Firmware are set out in the Appendix below. The OSS Components are provided subject to the licence terms and conditions applicable to such OSS Component (“OSS Licences”) as further detailed in the Appendix below. In the event of any conflict between the terms of this Agreement and an OSS Licence, the OSS Licence shall prevail in relation to the applicable OSS Component (only).

Export restrictions. You acknowledge that the Firmware may be subject to applicable import and export regulations, in particular in the United States and of the countries in which each party transacts business, specifically including U.S. Export Administration Act and Export Administration Regulations. You shall comply with any such laws and regulations as may be applicable.

Use of data. You understand and agree that PMI may collect certain technical, diagnostic and usage data relating to the Device, including as set out in https://www.pmiprivacy.com/.

Disclaimer. The Firmware is provided "as is," without any warranty. PMI disclaims all warranties, oral or written, express, implied, arising from course of dealing or use of trade, or by law. In addition to the previous sentence, the disclaimers set out in the relevant OSS Licences shall apply in relation to the applicable OSS Component.

No warranty. Any and all other warranties, including implied warranties of merchantability, fitness for a particular purpose, title, noninfringement of third party intellectual property rights, and accuracy are expressly excluded. You shall not have the right to make or pass on and shall take all measures necessary to ensure that neither you nor any of your distributors, agents, or employees shall make or pass on any warranty or representation on behalf of PMI to any third party.

Devices are for domestic and private use only. PMI will not have liability to you for any loss of profit, loss of business, loss of earnings, business interruption, or loss of business opportunity arising out of, or in connection with the Firmware or your use of the Firmware.

What is PMI liable for? In no event will PMI or its suppliers' total cumulative liability relating to the Firmware exceed the purchase price of the Device. Some jurisdictions do not allow the exclusion of implied warranties or limitation of liability for certain incidental or consequential damages. In these instances, the exclusions set out above may not apply to you.

PMI does not exclude or limit its liability to you if it would be unlawful to do so. This includes liability for death or personal injury caused by PMI’s negligence, fraud, or breach of your consumer rights.

OTHER IMPORTANT TERMS

If you breach this Agreement, your rights to use the Firmware end. This Agreement terminates automatically if you breach any term of this Agreement. Upon the termination of this Agreement, you must stop using the Firmware and destroy all copies of the Firmware in your possession. PMI may require you to provide evidence in writing that you have complied with your obligations under this heading.

PMI may transfer this Agreement to someone else. PMI may transfer its rights and obligations under this Agreement to another organisation. PMI will contact you to let you know if it plans to do this.

You need PMI’s consent to transfer your rights to someone else (except that you can always transfer our guarantee). You may only transfer your rights or your obligations under this Agreement to another person if PMI agrees to this in writing.

If a court finds part of this Agreement illegal, the rest will continue in force. Each of the paragraphs of this Agreement operates separately. If any court or relevant authority decides that any of them are unlawful, the remaining paragraphs will remain in full force and effect.

Even if PMI delays in enforcing this Agreement, PMI can still enforce it later. If PMI does not insist immediately that you do anything you are required to do under this Agreement, or if PMI delays in taking steps against you in respect of your breaking this Agreement, that will not mean that you do not have to do those things and it will not prevent PMI taking steps against you at a later date. For example, if you fail to pay and PMI does not chase you but continues to provide the Device, PMI can still require you to make the payment at a later date.

Which laws apply to this Agreement and where you may bring legal proceedings. This Agreement is governed by the laws of the jurisdiction in which the Device is sold.

Appendix
OSS

Summary:

Component License Copyright
CMSIS BSD-3-Clause Copyright (c) 2009-2017 ARM Limited. All rights reserved.
CMSIS Device BSD-3-Clause ARM Limited - STMicroelectronics
STM32L0 HAL BSD-3-Clause STMicroelectronics

Licences: :

Component: CMSIS
Copyright (c) 2009-2017 ARM Limited. All rights reserved.
BSD-3-Clause
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Component: CMSIS Device
Copyright ARM Limited – STMicroelectronics
BSD-3-Clause
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Component: STM32L0 HAL
Copyright STMicroelectronics
BSD-3-Clause
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.